Видео

Where do you get the material from? Amazon? Do you have a link? Thank you!!!

Thanks

Unfortunately buying stuff because it's cheaper and the CCP has their hands in all of China's businesses so im actually you're supporting the communist country don't know if you know that or not and in this world today China and Russia are not our friends 🇺🇲

Excellent build,! 👍 I like how you take the time to do a little detail on the fit and finish of the edges and mounting surfaces, well done.

Very impressive bits.

Great video, thanks for sharing! At what RPM did you run both those bits?

I own that exact router template guide you have shown in this video. I just want to let you know that you are making a mistake in its use. Whenever you need to use that template or any other template for that matter you need to start cutting on the long grain and go around to the end grain. You should not continue on the end grain and come across to the other long grain. That will increase the chance of grain tear out. You need to flip your work piece upside down, reinstall the template and now you will be cutting in the right direction. Think of a square piece of wood that you are using that aluminum corner round jig to soften the corners. You can only route opposite corners on one face and then after you flip the project over you can now do the remaining corners. I hope that helps.

my birch 6'x25" was way cleaner than your acacia island. I went through the available ones and tried to find the best one but damn yours looks like a bunch of scrap! I'd take that garbage back and tell them to do better!

I was looking at that spiral head flush bit with the individual cutters. Looks identical to ones on Amazon like the spe tool one but for less than ½ the price

The compression bit looks nice. The carbide blade bit looks fantastic! Your link goes to a page with 2 options. Is the one you have the 1 1/4" or 1 1/8" diameter? Grats on 12K subs.

Great review, just what I needed. Ended up going with the ridgid because of the shadow light. With proper form and going slow on cuts, deflection can be minimized. Additionally, 90% of the cuts I make are not extended and in the fixed position from which there is considerably less deflection. Besides if precision is critical I’ll probably take it to the cross cut sled on my table saw. Price helped too, snagged the ridgid 12” for $399 at Home Depot

Hey! Nice review. What's the blade arbor size on the R4241?

What's the arbor size of the 10-inch saw model R4241?

I just bought one of these saws, still in the box. Will put it together very soon. Thank you for an excellent video. I’m sure I will have the same problem at some point. Thanks again Sir, God Bless.

Great review. I recommend watching at 1.5 speed.

I always go to this vid when I’m gonna make more French cleats. Thanks much.

That's fine and all, and thanks for the upload, but... The problem you had with the OS not wanting you to use the MKS software, is the same but worse for Mac OS. There are ways around that problem, that involve entering some 'magic' words into the Mac Terminal. There are also some issues with recognizing ports with the Mac. The extension that comes from Elegoo should NOT be used and causes problems. Once installed there are some magic words to remove that too. The Mac OS has the proper (CH340) software already integrated into it. Sadly, that still eaves a few issues. Some have suggested that you need to push the middle reset button on the display board. You don't . Then there is more item to contend with. The inability to detect the COM (PC) or USB port with the MKS download tool. That is either the board being defective or more likely a bad USB C cable. Apparently some are power only and don't have all their wires. Yes, I know. This is ridiculous, but it is what it is. @ShopRamblings has done a good job of providing a walkthrough of the process. But be warned! This is still shark infested waters! lol. And if you ask me for the magic words, I'll copy paste them here. Otherwise I will assume everyone else had success with this! Now back to modding the Phecda for limit switches..... No idea how any laser comes without this basic and needed feature🤔

I am in South Africa and I get the feeling that TEMU is hit and miss.......Amazon has standards......Temu haha

Nice review covering the available features of this Hercules router. Now, since I don't need it immediately, will wait for the next sale. Just liked and subscribed. Looking fwd to more of your videos.

Very impressed and I like the video, good job, guys.

What's with everyone on youtube putting temu down. Yes they sell some crap just like the big box stores but I have had some good bargains from them and they are fine. Amazon sell just as much crap as temu as well. I have even purchased big brand named power tools that have failed less than a year of use.

No miter slot on the Bauer is a deal breaker for me. I have the Ridgid - it's fantastic...zero complaints

Great video, makes my opinion even stronger that the only thing I'll buy from the Chinese is chicken and broccoli LOL

looks solid and lasting ,very ihterested in this brand of tool !

So you expect thousand dollar quality from 100 dollar piece of wood?

I have the Bosch but trying to get it to 90 degree cuts were such a pain. Does the rigid have the same issue?

Gezzzz!!! What did you expect for $193.97 per square foot?

Just assembled mine and was wondering how you turn the soap off. Thanks.✌️😎

Great review. At the moment (June 2024) it's $20 cheaper to order the gauge and fence separately ($128 + $117 = $245) versus the combination ($265), the reason being the two pieces are in a USA warehouse and the combo is in Canada. Granted the combo has free shipping but it's only $3 shipping for the two pieces. Strange but true 😝

Thanks for the video. There use to be a product called Long Ranger or something like that but it is no where to be found any longer. Sorry if it was answered but what is the name of the pass thru blast gate and where did you get them?

i installed some anchors into concrete with this stuff, waited 3 hours and they pulled out! still stretchy/sticky!

Enjoyed your video "all of it" Nice job, like what you did with bench and the way you went round it. Thanks for the ideas on improving it。 God bless。

Very helpful!! This is exactly the video i wanted to see. I been having this pressure washer for a couple months already but never found a switch or anything to switch to the soap part so i just gave up.

Thanks mate, helped me a lot

This does have fraction readout to 1/16”. Go to unit setting, long press D. It will give options of fraction setting.

Really helpful review! Nice job!

i enjoy your videos and your losing weight !!

Just as a heads-up, if you want to get to the file location, and you're on window 11. 1. Find the desktop icon, right click on it to open drop down menu. 2. Once the tab expands, click at the very bottom to show more options 3. Then, when that tab shows up, the fourth item down should say open file location

Gonna follow this and turn it into a baking area!! And add tile on top!!Thanks!!!😎🤙

Sorry my friend you missed understand look I don’t expect you answer is I make comments about things people should in you tube you video is nice I live in London I don’t have friends to talk to and expend my time making comments for things I like things I don’t like especially for wood work because I’m carpenter since I was in college and because I born in Colombia and I m British now I want to settle one day I like to listen to you explain everything so nice and accurate easy to understand is like face to face conversation some people is boring to listen to but you is like when I was in college listen to my teacher thanks from the bottom of my heart that is all right 🙏🙏

I still waiting for you answer the last time I left a iMessage I live in London I’m retired but I’m from Colombia my miter saw is going to Colombia is so pretty precise thanks for the person who designed this take time to make like rolex watches iPhones so pretty I like to put in the frame but it made ti be use is heavy that is quality is so many out there some similar but nothing like this improvement not need price is correct 👍 for 200 pounds in London is not expensive at all I paid all ready I got Chinese one you video is wonderful thank you very very very much I hope people realised and check the quality of this jewel when I get to Colombia I going to put esmeraldas all round uf my friend god bless you and you channel 🙏🙏🙏🏥

Thank you for this video. I have had the same experience on Temu, which made me feel like I had been seriously ripped off by third party vendors on Amazon. When I did my comparisons, most of the products were IDENTICAL! The others were only different because one had a brand name stamped on them. However, all were marked made in China!!! In fact, it made me wonder if that brand had their items manufactured by that same factory, but paid the factory to apply the logo before it was shipped. Some of the markups on Amazon were as much as 400%, which told me where all of the negative remarks about Temu are coming from-all of those Amazon vendors that have been exposed!!!

I have the plasma cuuter guozhi 65 nhf its a beast 😮

Thanks for a good video

Thanks for your review. I just purchased one on sale. 89 plus tax.

My wife is going to be so ticked that I bought a new barn tool! Teehee! Thanks for the vid!

Hongdui have taken an idea and done it better. That's how progress is made. Somebody invents a steam engine, an internal combustion engine, a toaster, whatever, somebody else comes along and builds a better one. It was ever thus. In this case the guides are a safety feature and should be open source. I believe Saw Stop have done this with their technology, at least outside the US.

Thanks for the great comparison of all the styles.

Another great informational video! Thanks. I have been pondering these for some time. The looked very useful but as with many shop tools you have stuff that while it doesn't do exactly what you want it does the job. After watching the video I decided these are the way to go! Again thanks a ton for the info!

I was never showed either lol, to me dog holes are the way, just more versatile..having said that I'm in the process of designing my new bench for dog holes, dint know about the green handles of micro jig, I got the yellow and its for a tapering jig on table saw...by the way i really like those small squares you featured, thanks for that my man, totally accurate with cool features...